Fixing common residential door problems can be a difficult job for homeowners. Unfortunately, these issues can make the home less accessible, and it may even increase the home's security.

How Can You Fix A Door That Will Not Close Properly?

If your door will not close, it is likely due to misaligned hinges, a warped frame, or a loose strike plate. Inspect the door's alignment and ensure that it is straight. If it is rubbing against the frame, adjust the strike plate by slightly moving it in or out. This will help ensure the door latches properly and closes correctly. If adjusting the strike plate does not work, check the hinges for damage or looseness. Tighten any loose screws with a screwdriver, and replace any damaged or bent hinges with the same size and type.

What Should You Do If Your Door Is Sticking?

A sticking door can be a frustrating problem for homeowners because they may have a much harder time opening and closing their door. Unfortunately, this may result in damage occurring to either the door, frame, or flooring.

The first thing to check is if there is any debris or buildup on the door or frame. This can cause the door to stick and prevent it from closing or opening correctly. Use a soft cloth to clean the door and the frame thoroughly. This should help to remove any debris or buildup that may be causing the door to stick. If there is no debris or buildup causing the sticking, then the problem may be due to the door or hinge placement. If the hinges are loose, tighten them with a screwdriver or adjust them to ensure they're aligned correctly. If the door is still sticking, sand down any rough areas on the door's surface. Make sure to sand evenly to create a smooth surface.

How Can You Fix A Door That Is Sagging?

Often, this problem starts due to issues with the screws not providing enough support for the weight of the door. If the screws are loose or stripped, they cannot support the door's weight. Tighten any loose screws with a screwdriver or replace any stripped screws with longer ones. This should help the door to sit correctly in the frame.

You can also use a shim to add support to the hinge. A shim is a small piece of wood or plastic placed between the hinge and the door frame to help level the door. Place the shim on the hinge and reattach it to the frame with longer screws. For more information on door repair, contact a company near you.